Booster Pump Factory Introduces The Features Of Booster Valves

The booster valve is a kind of piston booster valve with compressed air as the power source. When the air is taken in, the air-controlled spool of the booster valve switches back and forth to control the piston of the booster valve to reciprocate at a very fast speed. When the pressure increases, the reciprocating speed of the piston slows down until it stops. At this time, the output pressure of the booster valve is constant, the energy consumption is the lowest, and each component stops working; no matter what causes the pressure of the pressure-holding circuit to drop, the booster valve will Automatic start, supplementing leakage pressure, keep circuit pressure constant. Below, Booster Pump Factory introduces the features of booster valves:

1. Strong adjustability—both pressure and flow are accurately adjusted by the pressure regulating valve of the driving gas.

2. Wide range of applications The booster valve can be used for most non-corrosive gas media.

3. High-cost performance has the characteristics of high output performance and low cost.

4. Simple maintenance The booster valve has fewer parts and seals, simple maintenance, and low cost.

5. The maximum working pressure of the booster valve with high output pressure can reach 30,400psi (210Mpa).

6. Large output flow The booster valve needs to be driven by compressed air not exceeding 150psi (1.0Mpa) to obtain a large output flow. According to different work requirements, there are various series of products for the booster valve for users to choose from.

6. Working principle The booster valve is driven by the low-pressure gas at the large-area piston end to generate high-pressure gas at the small-area piston end.

7. Automatic restart - when working, the booster valve works quickly and reciprocates. As the output pressure approaches the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure, at this time, the energy consumption is very small, no heat is generated, and there is no movement of parts. When the pressure balance is broken, the booster valve automatically starts to work to the next balance.

8. Flexible application - from simple manual operation to fully automated operation, gas boosters are suitable for various application fields. The air motors are interchangeable for most models of pumps in the same series.